CONSULTANT GUIDE
-
An architect designs your project and prepares the drawings for approval and construction. In NSW, only someone registered with the NSW Architects Registration Board can call themselves an architect. Most new builds, major renovations and heritage projects start with one.
-
A building designer also prepares plans, usually for smaller or more straightforward residential projects. They are not registered architects, but many are accredited through industry bodies.
-
An interior designer plans the look and feel inside: layouts, joinery, finishes, lighting and fixtures. They often work alongside the architect on high-end projects, or on their own for kitchens, bathrooms and fitouts.
-
A town planner advises on what council planning controls allow on your site and prepares the planning documents for a development application (DA), such as the Statement of Environmental Effects. They are most useful on complex or heritage proposals, or where a design does not fit neatly within the controls.
-
A surveyor measures your site. A detail survey records boundaries, levels, trees and neighbouring structures, and is usually the first document your architect needs. Surveyors also set out the building on site and confirm it is in the right place during construction.
-
A structural engineer designs the parts that hold the building up: footings, slabs, beams, columns and retaining walls. You need one whenever walls are removed, floors are added or anything new is built.
-
A geotechnical engineer tests the soil and rock on your site and tells the structural engineer what the building can sit on. They are essential for basements, excavation, sloping sites and sandy coastal ground.
-
These engineers design how water moves on and off your site, including stormwater drainage, on-site detention tanks where council requires them, and the plumbing and drainage systems within the building.
-
A registered certifier checks that your project complies with the building codes and its approvals. Depending on the project, they issue a Complying Development Certificate (CDC) or a Construction Certificate (CC) before work starts, inspect the work at key stages, and issue the Occupation Certificate (OC) at the end.
-
A BASIX assessor prepares the BASIX certificate, which sets the energy and water targets your home must meet. In NSW it is required for new homes and for alterations and additions valued at $50,000 or more.
-
An arborist assesses trees on and near your site, prepares reports for council and advises how to protect trees during construction. You need one when trees are close to the works or need to be removed.
-
A heritage consultant prepares a Heritage Impact Statement when your property is heritage-listed or in a heritage conservation area, explaining how the design respects the original building.
-
A bushfire consultant assesses your site's Bushfire Attack Level (BAL) when it is on bush fire prone land, which sets the construction standards your home must meet. This is common on the Northern Beaches and in the Sutherland Shire.
-
An acoustic consultant advises on noise, both getting in and getting out. They are often required near main roads, rail lines and flight paths, and for hospitality venues and apartment buildings.
-
A landscape architect designs your outdoor spaces, from gardens and paving to pools and planting, and prepares landscape plans when council requires them for a DA.
-
A quantity surveyor prepares independent cost estimates and reports. Some councils require one for larger DAs, and lenders often ask for one before approving a construction loan.
-
A fire safety engineer designs fire safety solutions where a project does not follow the standard requirements of the National Construction Code, and advises on fire services in commercial and apartment buildings.
-
An access consultant checks that your design meets accessibility requirements for people with disability. You usually need one for commercial fitouts and apartment buildings.
-
A mechanical engineer designs heating, cooling, ventilation and kitchen exhaust systems. They are essential for hospitality fitouts and most commercial projects.
-
Kitchen or bathroom renovation
Often no consultants at all if nothing structural changes. If walls are coming out, you will need a structural engineer. In an apartment, you will also need approval from your strata before work starts.Extension or second storey
An architect or building designer, surveyor, structural engineer, stormwater engineer, BASIX assessor and certifier. Depending on the site, you may also need a geotechnical engineer, town planner or arborist.New home or knockdown-rebuild
At a minimum, an architect, surveyor, geotechnical engineer, structural engineer, stormwater engineer, BASIX assessor and certifier. Landscape, arborist, bushfire, heritage and acoustic reports may be needed depending on the site and council.Heritage home
Everything that applies above, plus a heritage consultant and an architect experienced with heritage buildings.Apartment building (Class 2)
A full design team. Under the Design and Building Practitioners Act 2020, key designs for Class 2 buildings must be prepared and declared by registered design practitioners. Expect fire safety, acoustic, access and hydraulic consultants as well.Commercial fitout
A designer or architect, plus mechanical, electrical, hydraulic and fire services engineers and an access consultant, depending on the scope. You will also need landlord approval and, in a shopping centre, sign-off against the centre’s fitout guide. -
Surveyor. Your architect needs an accurate survey before design starts.
Architect or designer. They develop the concept and coordinate the rest of the design team.
Engineers. Geotechnical, structural and stormwater engineers come on board as the design develops.
Specialist reports. Town planning, heritage, arborist, bushfire, acoustic and BASIX reports, as needed for your DA or CDC.
Certifier. Engaged before lodging a CDC, or once your DA is approved so they can issue the Construction Certificate.
Builder. Ideally involved from the concept stage, so the design is priced and tested for buildability as it develops, not after it is approved.
Most people we meet on a first site visit have not engaged an architect, engineer or certifier yet, and many did not know they needed to. That is completely normal. Unless you have built before, there is no reason you would know who does what.
This guide explains the consultants involved in a typical residential or commercial project in NSW, what each one does and when you are likely to need them. If you are not sure where to start, talk to us. We can recommend people we work with regularly and help you engage the right ones in the right order.
Common Terms &
Questions
-
DA (Development Application). An application to council for planning approval to build or change a property.
CDC (Complying Development Certificate). A faster combined planning and building approval for projects that meet set standards, issued by a registered certifier or council.
CC (Construction Certificate). Required after a DA is approved and before building work starts, confirming the detailed drawings comply with the National Construction Code.
OC (Occupation Certificate). Issued at completion, confirming the building is suitable to occupy.
Principal Certifier. The certifier appointed to carry out inspections and oversee compliance during construction.
BASIX. The NSW Building Sustainability Index, which sets energy and water targets for homes.
NCC (National Construction Code). The national set of technical standards that all building work in Australia must meet.
Class 2. The building classification for apartment buildings under the National Construction Code.
HBCF (Home Building Compensation Fund). Insurance that protects NSW homeowners if their builder cannot complete the work or fix defects because they have died, disappeared or become insolvent.
Provisional sum. An allowance in the contract for work whose cost cannot be finalised when the contract is signed, such as excavating unexpected rock.
Prime cost (PC) item. An allowance for supplying an item that has not been selected yet, such as tapware or appliances.
Variation. A change to the contract scope or price, agreed in writing.
Defects liability period. A period after completion during which the builder returns to fix defects.
Statutory warranty. Under the NSW Home Building Act, homeowners are protected by warranties of six years for major defects and two years for all other defects.
-
There is no law that says you must use an architect for a house, and a building designer can prepare plans for many projects. Most high-end and custom homes are architect-designed, though, because of the design quality and the experience they bring to approvals.
-
Usually a surveyor and an architect. If you are not sure, talk to us first. We can look at your site, tell you who you are likely to need and recommend people we work with regularly.
-
Yes. We have long-standing relationships with architects, engineers, certifiers and other consultants, including Studio Frino and Common Office, and we are happy to introduce you.
-
Book a site visit. We will look at your site, talk through your project and point you to the right people to get it started.
Projects, started properly.